SPLK-2003 Braindumps PDF, Splunk SPLK-2003 Exam Cram
New 2023 SPLK-2003 Sample Questions Reliable SPLK-2003 Test Engine
NEW QUESTION # 22
Which of the following is the complete list of the types of backups that are supported by Phantom?
- A. Full backups.
- B. Full and incremental backups.
- C. Full and delta backups.
- D. Full, delta, and incremental backups.
Answer: C
Explanation:
Explanation
The correct answer is D because the Splunk SOAR product supports two types of backups: full and delta. A full backup is a complete backup of the entire Splunk SOAR system, including the configuration, data, and files. A delta backup is a partial backup of the Splunk SOAR system, which only includes the changes that have occurred since the last full backup. The answer A is incorrect because the Splunk SOAR product supports more than one type of backup. The answer B is incorrect because the Splunk SOAR product does not support incremental backups, which are backups of the changes that have occurred since the last backup of any type. The answer C is incorrect because the Splunk SOAR product does not support incremental backups, which are backups of the changes that have occurred since the last backup of any type. Reference: Splunk SOAR Admin Guide, page 67.
NEW QUESTION # 23
When analyzing events, a working on a case, significant items can be marked as evidence. Where can ail of a case's evidence items be viewed together?
- A. Evidence report.
- B. Workbook page Evidence tab.
- C. Investigation page Evidence tab.
- D. At the bottom of the Investigation page widget panel.
Answer: A
Explanation:
Explanation
The correct answer is B because the evidence report is a PDF document that contains all the evidence items of a case, along with the case details, phases, tasks, and comments. The evidence report can be generated from the Case Details page by clicking on the Generate Evidence Report button. The answer A is incorrect because the Workbook page Evidence tab only shows the evidence items that are associated with a specific phase or task of a case, not all the evidence items of the case. The answer C is incorrect because the Investigation page Evidence tab only shows the evidence items that are associated with a specific event or artifact of a case, not all the evidence items of the case. The answer D is incorrect because there is no such option at the bottom of the Investigation page widget panel. Reference: Splunk SOAR User Guide, page 64.
NEW QUESTION # 24
A user has written a playbook that calls three other playbooks, one after the other. The user notices that the second playbook starts executing before the first one completes. What is the cause of this behavior?
- A. Incorrect Join configuration on the second playbook.
- B. Synchronous execution has not been configured.
- C. The first playbook is performing poorly.
- D. The steep option for the second playbook is not set to a long enough interval.
Answer: B
Explanation:
Explanation
The correct answer is D because synchronous execution has not been configured. Synchronous execution is a feature that allows you to control the order of execution of playbook blocks. By default, Phantom executes playbook blocks asynchronously, meaning that it does not wait for one block to finish before starting the next one. This can cause problems when you have dependencies between blocks or when you call other playbooks.
To enable synchronous execution, you need to use the sync action in the run playbook block and specify the name of the next block to run after the called playbook completes. See Splunk SOAR Documentation for more details.
NEW QUESTION # 25
What are indicators?
- A. Artifact values with special security significance.
- B. Action results that may appear in multiple containers.
- C. Artifact values that can appear in multiple containers.
- D. Action result items that determine the flow of execution in a playbook.
Answer: C
Explanation:
Explanation
The correct answer is C because indicators are artifact values that can appear in multiple containers.
Indicators are a special type of artifacts that are used to store information that is relevant for threat intelligence, such as IP addresses, URLs, file hashes, etc. Indicators can be created using the add indicator action in any playbook block and can be collected using the get indicators action in the filter block. Indicators can also be used to trigger active playbooks based on their label or type. See Splunk SOAR Documentation for more details.
NEW QUESTION # 26
What is the simplest way to pass data between playbooks?
- A. Artifacts
- B. Action results
- C. KV Store
- D. File system
Answer: D
NEW QUESTION # 27
When configuring a Splunk asset for Phantom to connect to a SplunkC loud instance, the user discovers that they need to be able to run two different on_poll searches. How is this possible
- A. Configure the second query in the Phantom app for Splunk.
- B. Enter the two queries in the asset as comma separated values.
- C. Configure a second Splunk asset with the second query.
- D. Install a second Splunk app and configure the query in the second app.
Answer: C
Explanation:
Explanation
The correct answer is D because to run two different on_poll searches, you need to configure a second Splunk asset with the second query. The on_poll search is the query that Phantom uses to fetch events from Splunk and create containers and artifacts. You can only specify one on_poll search per Splunk asset. If you want to run another on_poll search, you need to create another Splunk asset with a different name and IP address and configure the second query in the asset settings. See Splunk SOAR Documentation for more details.
NEW QUESTION # 28
Which of the following are the steps required to complete a full backup of a Splunk Phantom deployment' Assume the commands are executed from /opt/phantom/bin and that no other backups have been made.
- A. On the command line enter: rode sudo python ibackup.pyc --setup, then audo phenv python ibackup.pyc
--backup. - B. Within the UI: Select from the main menu Administration > System Health > Backup.
- C. On the command line enter: sudo phenv python ibackup.pyc --backup -backup-type full, then sudo phenv python ibackup.pyc --setup.
- D. Within the UI: Select from the main menu Administration > Product Settings > Backup.
Answer: C
Explanation:
Explanation
The correct answer is B because the steps required to complete a full backup of a Splunk Phantom deployment are to first run the --backup --backup-type full command and then run the --setup command.
The --backup command creates a backup file in the /opt/phantom/backup directory. The --backup-type full option specifies that the backup file includes all the data and configuration files of the Phantom server.
The --setup command creates a configuration file that contains the encryption key and other information needed to restore the backup file. See Splunk SOAR Certified Automation Developer Track for more details.
NEW QUESTION # 29
Which of the following are the steps required to complete a full backup of a Splunk Phantom deployment' Assume the commands are executed from /opt/phantom/bin and that no other backups have been made.
- A. On the command line enter: rode sudo python ibackup.pyc --setup, then audo phenv python ibackup.pyc
--backup. - B. Within the UI: Select from the main menu Administration > System Health > Backup.
- C. On the command line enter: sudo phenv python ibackup.pyc --backup -backup-type full, then sudo phenv python ibackup.pyc --setup.
- D. Within the UI: Select from the main menu Administration > Product Settings > Backup.
Answer: C
NEW QUESTION # 30
Which app allows a user to run Splunk queries from within Phantom?
- A. Phantom App for Splunk.
- B. Splunk App for Phantom?
- C. Splunk App for Phantom Reporting.
- D. The Integrated Splunk/Phantom app.
Answer: A
Explanation:
Explanation
The Phantom App for Splunk allows a user to run Splunk queries from within Phantom. This app provides actions such as run query, ingest events, and save search, which enable the user to interact with Splunk from Phantom playbooks or the Phantom UI. The other apps are not relevant for this use case. The Splunk App for Phantom is used to send data from Splunk to Phantom. The Integrated Splunk/Phantom app is a deprecated app that was replaced by the Splunk App for Phantom. The Splunk App for Phantom Reporting is used to generate reports on Phantom activity from Splunk. Reference, page 1.
NEW QUESTION # 31
Within the 12A2 design methodology, which of the following most accurately describes the last step?
- A. List of the outputs of the playbook design.
- B. List of the apps used by the playbook.
- C. List of the data needed to run the playbook.
- D. List of the actions of the playbook design.
Answer: A
Explanation:
Explanation
The correct answer is C because the last step of the 12A2 design methodology is to list the outputs of the playbook design. The outputs are the expected results or outcomes of the playbook execution, such as sending an email, creating a ticket, blocking an IP, etc. The outputs should be aligned with the objectives and goals of the playbook. See Splunk SOAR Certified Automation Developer for more details.
NEW QUESTION # 32
During a second test of a playbook, a user receives an error that states: 'an empty parameters list was passed to phantom.act()." What does this indicate?
- A. The container has artifacts not parameters.
- B. The playbook is using an incorrect container.
- C. The playbook debugger's scope is set to new.
- D. The playbook debugger's scope is set to all.
Answer: C
Explanation:
Explanation
The correct answer is C because the error message indicates that the playbook debugger's scope is set to new.
The scope option determines which containers are used for debugging the playbook. If the scope is set to new, the debugger will only use containers that are created after the debugger is started. If the scope is set to all, the debugger will use all containers that match the playbook's filter criteria. The error message means that the debugger did not find any new containers with parameters to pass to the phantom.act() function. See Splunk SOAR Documentation for more details.
NEW QUESTION # 33
What is the default embedded search engine used by Phantom?
- A. Embedded Splunk search engine.
- B. Embedded Django search engine.
- C. Embedded Phantom search engine.
- D. Embedded Elastic search engine.
Answer: D
NEW QUESTION # 34
After enabling multi-tenancy, which of the Mowing is the first configuration step?
- A. Select the associated tenant artifacts.
- B. Change the tenant permissions.
- C. Configure the default tenant.
- D. Set default tenant base address.
Answer: B
NEW QUESTION # 35
Which of the following is the complete list of the types of backups that are supported by Phantom?
- A. Full and incremental backups.
- B. Full backups.
- C. Full, delta, and incremental backups.
- D. Full and delta backups.
Answer: A
NEW QUESTION # 36
A user wants to use their Splunk Cloud instance as the external Splunk instance for Phantom. What ports need to be opened on the Splunk Cloud instance to facilitate this? Assume default ports are in use.
- A. TCP 8080 and TCP 8191.
- B. TCP 8088 and TCP 8099.
- C. TCP 80 and TCP 443.
- D. Splunk Cloud is not supported.
Answer: B
Explanation:
Explanation
A user who wants to use their Splunk Cloud instance as the external Splunk instance for Phantom needs to open TCP 8088 and TCP 8099 ports on the Splunk Cloud instance. TCP 8088 is used for the HTTP Event Collector (HEC) service, which allows Phantom to send data to Splunk Cloud. TCP 8099 is used for the Splunk REST API service, which allows Phantom to query data from Splunk Cloud. The other port combinations are not valid for this scenario. Splunk Cloud is supported as an external Splunk instance for Phantom. Reference, page 6.
NEW QUESTION # 37
Which of the following are examples of things commonly done with the Phantom REST APP
- A. Use Django queries; use Docker to create a container and add artifacts to it; remove temporary lists.
- B. Use SQL queries; use curl to create a container and add artifacts to it; remove temporary lists.
- C. Use Django queries; use curl to create a container and add artifacts to it; add action blocks.
- D. Use Django queries; use curl to create a container and add artifacts to it; remove temporary lists.
Answer: D
Explanation:
Explanation
The correct answer is A because using Django queries, using curl to create a container and add artifacts to it, and removing temporary lists are examples of things commonly done with the Phantom REST APP. The Phantom REST APP is a built-in app that allows you to interact with the Phantom server using REST API calls. You can use the run query action to execute Django queries on the Phantom database and return the results as JSON. You can use the curl command to send HTTP requests to the Phantom server and perform various operations, such as creating containers, adding artifacts, running playbooks, etc. You can use the remove list action to delete temporary lists that are no longer needed. See Splunk SOAR Documentation for more details.
NEW QUESTION # 38
Which of the following describes the use of labels m Phantom?
- A. Labels control which apps are allowed to execute actions on the container.
- B. Labels control the default seventy, ownership, and sensitivity for the container.
- C. Labels determine the service level agreement (SLA) for a container.
- D. Labels determine which playbook(s) are executed when a container is created.
Answer: B
NEW QUESTION # 39
A customer wants to design a modular and reusable set of playbooks that all communicate with each other.
Which of the following is a best practice for data sharing across playbooks?
- A. Cal the child playbooks getter function.
- B. Create artifacts using one playbook and collect those artifacts in another playbook.
- C. Use the py-postgresq1 module to directly save the data in the Postgres database.
- D. Use the Handle method to pass data directly between playbooks.
Answer: C
NEW QUESTION # 40
Which of the following will show all artifacts that have the term results in a filePath CEF value?
- A. .../result/artifact?_query_cef_filepath_icontains=''results
- B. ...rest/artifacts/filePath=''%results%''
- C. .../rest/artifact?_filter_cef_filePath_icontain=''results''
- D. .../result/artifacts/cef/filePath= '%results%''
Answer: A
NEW QUESTION # 41
Without customizing container status within Phantom, what are the three types of status for a container?
- A. Mew, Open, Resolved
- B. New, In Progress, Closed
- C. Low, Medium, Critical
- D. Low, Medium, High
Answer: A
Explanation:
Explanation
The correct answer is C because without customizing container status within Phantom, the three types of status for a container are New, Open, and Resolved. A container is a data object that represents an event or incident that needs to be investigated or remediated. A container has a status attribute that indicates its current state. The default values for the status attribute are New, Open, and Resolved. New means that the container has been created but not yet processed. Open means that the container is being processed by a playbook or a user. Resolved means that the container has been processed and closed. You can customize the container status values in the Phantom UI by going to Administration > Product Settings > Container Status. See Splunk SOAR Documentation for more details.
NEW QUESTION # 42
Which Phantom API command is used to create a custom list?
- A. phantom.new_list()
- B. phantom.add_list()
- C. phantom.create_list()
- D. phantom.include_list()
Answer: C
Explanation:
Explanation
The Phantom API command to create a custom list is phantom.create_list(). This command takes a list name and an optional description as parameters and returns a list ID if successful. The other commands are not valid Phantom API commands. phantom.add_list() is a Python function that can be used in custom code blocks to add data to an existing list. Reference, page 5.
NEW QUESTION # 43
During a second test of a playbook, a user receives an error that states: 'an empty parameters list was passed to phantom.act()." What does this indicate?
- A. The playbook debugger's scope is set to new.
- B. The playbook is using an incorrect container.
- C. The container has artifacts not parameters.
- D. The playbook debugger's scope is set to all.
Answer: C
NEW QUESTION # 44
Without customizing container status within Phantom, what are the three types of status for a container?
- A. New, In Progress, Closed
- B. Mew, Open, Resolved
- C. Low, Medium, Critical
- D. Low, Medium, High
Answer: A
NEW QUESTION # 45
A filter block with only one condition configured which states: artifact.*.cef .sourceAddress !- , would permit which of the following data to pass forward to the next block?
- A. Null values
- B. Non-null destinationAddresses
- C. Null IP addresses
- D. Non-null IP addresses
Answer: A
NEW QUESTION # 46
Which of the following supported approaches enables Phantom to run on a Windows server?
- A. Run the Phantom OVA as a virtual machine.
- B. Run the Phantom OVA as a cloud instance.
- C. Install the Phantom RPM in a GNU Cygwin implementation.
- D. Install the Phantom RPM file in Windows Subsystem for Linux (WSL).
Answer: B
NEW QUESTION # 47
......
Splunk is a leading platform for operational intelligence and security information and event management. It offers a comprehensive range of analytics tools that help organizations make more informed decisions based on the data generated by their IT systems. Splunk Phantom is an extension of the Splunk platform that focuses on automating security and IT incident response workflows. It enables organizations to streamline their incident response processes by automating repetitive tasks and orchestrating responses across different systems and teams.
The SPLK-2003 exam covers a wide range of topics related to Splunk Phantom administration. These include setting up the Phantom platform, creating and managing assets, creating and managing playbooks, creating and managing roles and users, and monitoring and troubleshooting the platform. SPLK-2003 exam is designed to test a candidate's knowledge of various aspects of Splunk Phantom administration and their ability to apply that knowledge in real-world scenarios.
Feel Splunk SPLK-2003 Dumps PDF Will likely be The best Option: https://braindumps.actual4exams.com/SPLK-2003-real-braindumps.html