Updated MuleSoft-Platform-Architect-I Dumps PDF - MuleSoft-Platform-Architect-I Real Valid Brain Dumps With 154 Questions!
100% Free MuleSoft-Platform-Architect-I Exam Dumps Use Real Salesforce MuleSoft Dumps
NEW QUESTION # 65
What is most likely NOT a characteristic of an integration test for a REST API implementation?
- A. The test is triggered by an external HTTP request
- B. The test runs immediately after the Mule application has been compiled and packaged
- C. The test needs all source and/or target systems configured and accessible
- D. The test prepares a known request payload and validates the response payload
Answer: B
Explanation:
Correct Answer : The test runs immediately after the Mule application has been compiled and packaged
*****************************************
>> Integration tests are the last layer of tests we need to add to be fully covered.
>> These tests actually run against Mule running with your full configuration in place and are tested from external source as they work in PROD.
>> These tests exercise the application as a whole with actual transports enabled. So, external systems are affected when these tests run.
So, these tests do NOT run immediately after the Mule application has been compiled and packaged.
FYI... Unit Tests are the one that run immediately after the Mule application has been compiled and packaged.
NEW QUESTION # 66
A company deploys Mule applications with default configurations through Runtime Manager to customer-hosted Mule runtimes. Each Mule application is an API implementation that exposes RESTful interfaces to API clients. The Mule runtimes are managed by the MuleSoft-hosted control plane. The payload is never used by any Logger components.
When an API client sends an HTTP request to a customer-hosted Mule application, which metadata or data (payload) is pushed to the MuleSoft-hosted control plane?
- A. No data
- B. Only the data
- C. The data and metadata
- D. Only the metadata
Answer: D
Explanation:
Understanding the Data Flow Between Mule Runtimes and Control Plane:
When Mule applications are deployed on customer-hosted Mule runtimes, the MuleSoft-hosted control plane (Anypoint Platform) can monitor and manage these applications. However, due to data privacy and security, the control plane only collects specific types of information.
Typically, only metadata about the request and response (such as headers, status codes, and timestamps) is sent to the MuleSoft-hosted control plane. The actual payload data is not transmitted unless explicitly configured, ensuring that sensitive data remains within the customer's network.
Evaluating the Options:
Option A (Only the data): This is incorrect because the payload data itself is not automatically sent to the control plane in default configurations.
Option B (No data): This is incorrect as well; while the payload is not sent, metadata is still collected and sent to the control plane.
Option C (The data and metadata): This option is incorrect because data (payload) is not transmitted to the control plane by default.
Option D (Correct Answer): Only the metadata is sent to the MuleSoft-hosted control plane by default, aligning with MuleSoft's design to prioritize security and data privacy for customer-hosted runtimes.
Conclusion:
Option D is the correct answer, as by default, only metadata is sent to the MuleSoft-hosted control plane, and not the payload. This configuration is designed to protect sensitive data from being exposed outside the customer's hosted environment.
For more details, refer to MuleSoft's documentation on telemetry data collected in customer-hosted Mule runtimes and the MuleSoft control plane.
NEW QUESTION # 67
A manufacturing company has deployed an API implementation to CloudHub and has not configured it to be automatically restarted by CloudHub when the worker is not responding.
Which statement is true when no API Client invokes that API implementation?
- A. Alerts on the API invocations are raised but no alerts on the API implementation can be raised
- B. Alerts on the APT invocation and API implementation can be raised
- C. No alert on the API invocations is raised but alerts on the API implementation can be raised
- D. No alert on the API invocations and APT implementation can be raised
Answer: C
Explanation:
When an API implementation is deployed on CloudHub without configuring automatic restarts in case of worker non-responsiveness, MuleSoft's monitoring and alerting behavior is as follows:
API Invocation Alerts:
If no clients are invoking the API, there will be no invocation alerts triggered, as alerts related to invocations depend on actual client requests.
Implementation-Level Alerts:
Even without invocation, CloudHub can still monitor the state of the API implementation. If the worker becomes unresponsive, an alert related to the API implementation's health or availability could still be raised.
Why Option C is Correct:
This option correctly identifies that no invocation-related alerts would be triggered in the absence of client requests, while implementation-level alerts could still be generated based on the worker's state.
Reference
For additional information, check MuleSoft documentation on CloudHub monitoring and alert configurations to understand worker status alerts versus invocation alerts.
NEW QUESTION # 68
Question 10: Skipped
An API implementation returns three X-RateLimit-* HTTP response headers to a requesting API client. What type of information do these response headers indicate to the API client?
- A. The remaining capacity allowed by the API implementation
- B. A correlation ID that should be sent in the next request
- C. The error codes that result from throttling
- D. The HTTP response size
Answer: A
Explanation:
Correct Answer : The remaining capacity allowed by the API implementation.
*****************************************
>> Reference: https://docs.mulesoft.com/api-manager/2.x/rate-limiting-and-throttling-sla-based-policies#response-headers
NEW QUESTION # 69
What correctly characterizes unit tests of Mule applications?
- A. They must be run in a unit testing environment with dedicated Mule runtimes for the environment
- B. They must be triggered by an external client tool or event source
- C. They are typically written using MUnit to run in an embedded Mule runtime that does not require external connectivity
- D. They test the validity of input and output of source and target systems
Answer: C
Explanation:
Correct Answer : They are typically written using MUnit to run in an embedded Mule runtime that does not require external connectivity.
*****************************************
Below TWO are characteristics of Integration Tests but NOT unit tests:
>> They test the validity of input and output of source and target systems.
>> They must be triggered by an external client tool or event source.
It is NOT TRUE that Unit Tests must be run in a unit testing environment with dedicated Mule runtimes for the environment.
MuleSoft offers MUnit for writing Unit Tests and they run in an embedded Mule Runtime without needing any separate/ dedicated Runtimes to execute them. They also do NOT need any external connectivity as MUnit supports mocking via stubs.
https://dzone.com/articles/munit-framework
NEW QUESTION # 70
Which of the below, when used together, makes the IT Operational Model effective?
- A. Create reusable assets, Make them discoverable so that LOB teams can self-serve and browse the APIs, Get active feedback and usage metrics
- B. Create resuable assets, make them discoverable so that LOB teams can self-serve and browse the APIs
- C. Create reusable assets, Do marketing on the created assets across organization, Arrange time to time LOB reviews to ensure assets are being consumed or not
Answer: B
Explanation:
Correct Answer : Create reusable assets, Make them discoverable so that LOB teams can self-serve and browse the APIs, Get active feedback and usage metrics.
*****************************************
NEW QUESTION # 71
An auto manufacturer has a mature CI/CD practice and wants to automate packaging and deployment of any Mule applications to various deployment targets, including CloudHub workers/replicas, customer-hosted Mule runtimes, and Anypoint Runtime Fabric.
Which MuleSoft-provided tool or component facilitates automating the packaging and deployment of Mule applications to various deployment targets as part of the company's CI/CD practice?
- A. Anypoint Platform CLI
- B. Mule Maven plugin
- C. Anypoint Platform REST APIs
- D. Anypoint Runtime Manager
Answer: B
Explanation:
For organizations with established CI/CD practices, the Mule Maven plugin is the recommended tool for automating packaging and deployment across multiple environments, including CloudHub, on-premise Mule runtimes, and Anypoint Runtime Fabric. Here's why:
Automation with Maven:
The Mule Maven plugin allows for CI/CD integration by supporting automated build and deployment processes. It is commonly used in CI/CD pipelines to handle application packaging and deployment directly through Maven commands, making it ideal for teams that want consistent deployment automation across different MuleSoft environments.
Supported Deployment Targets:
The Mule Maven plugin supports deployment to various targets, including CloudHub, Runtime Fabric, and on-premises servers, thus meeting the needs of environments with diverse deployment destinations.
Why Option B is Correct:
The Mule Maven plugin is specifically designed for CI/CD pipelines and integrates with Jenkins, GitLab, and other CI/CD tools to facilitate continuous deployment. It is the most efficient MuleSoft-provided tool for this purpose.
of Incorrect Options:
Option A (Anypoint Runtime Manager) provides deployment management but does not automate CI/CD processes.
Option C (Anypoint Platform CLI) can script deployments but lacks direct integration with CI/CD tools.
Option D (Anypoint Platform REST APIs) requires custom scripting for deployment, which can be more complex than using the Mule Maven plugin.
Reference
For more details, refer to MuleSoft documentation on using the Mule Maven plugin for CI/CD.
NEW QUESTION # 72
What condition requires using a CloudHub Dedicated Load Balancer?
- A. When server-side load-balanced TLS mutual authentication is required between API implementations and API clients
- B. When custom DNS names are required for API implementations deployed to customer-hosted Mule runtimes
- C. When API invocations across multiple CloudHub workers must be load balanced
- D. When cross-region load balancing is required between separate deployments of the same Mule application
Answer: A
Explanation:
Correct Answe r: When server-side load-balanced TLS mutual authentication is required between API implementations and API clients
*****************************************
Fact/ Memory Tip: Although there are many benefits of CloudHub Dedicated Load balancer, TWO important things that should come to ones mind for considering it are:
>> Having URL endpoints with Custom DNS names on CloudHub deployed apps
>> Configuring custom certificates for both HTTPS and Two-way (Mutual) authentication.
Coming to the options provided for this question:
>> We CANNOT use DLB to perform cross-region load balancing between separate deployments of the same Mule application.
>> We can have mapping rules to have more than one DLB URL pointing to same Mule app. But vicevera (More than one Mule app having same DLB URL) is NOT POSSIBLE
>> It is true that DLB helps to setup custom DNS names for Cloudhub deployed Mule apps but NOT true for apps deployed to Customer-hosted Mule Runtimes.
>> It is true to that we can load balance API invocations across multiple CloudHub workers using DLB but it is NOT A MUST. We can achieve the same (load balancing) using SLB (Shared Load Balancer) too. We DO NOT necessarily require DLB for achieve it.
So the only right option that fits the scenario and requires us to use DLB is when TLS mutual authentication is required between API implementations and API clients.
NEW QUESTION # 73
An organization wants MuleSoft-hosted runtime plane features (such as HTTP load balancing, zero downtime, and horizontal and vertical scaling) in its Azure environment. What runtime plane minimizes the organization's effort to achieve these features?
- A. Anypoint Platform for Pivotal Cloud Foundry
- B. Anypoint Runtime Fabric
- C. CloudHub
- D. A hybrid combination of customer-hosted and MuleSoft-hosted Mule runtimes
Answer: B
Explanation:
Correct Answer : Anypoint Runtime Fabric
*****************************************
>> When a customer is already having an Azure environment, It is not at all an ideal approach to go with hybrid model having some Mule Runtimes hosted on Azure and some on MuleSoft. This is unnecessary and useless.
>> CloudHub is a Mulesoft-hosted Runtime plane and is on AWS. We cannot customize to point CloudHub to customer's Azure environment.
>> Anypoint Platform for Pivotal Cloud Foundry is specifically for infrastructure provided by Pivotal Cloud Foundry
>> Anypoint Runtime Fabric is right answer as it is a container service that automates the deployment and orchestration of Mule applications and API gateways. Runtime Fabric runs within a customer-managed infrastructure on AWS, Azure, virtual machines (VMs), and bare-metal servers.
-Some of the capabilities of Anypoint Runtime Fabric include:
-Isolation between applications by running a separate Mule runtime per application.
-Ability to run multiple versions of Mule runtime on the same set of resources.
-Scaling applications across multiple replicas.
-Automated application fail-over.
-Application management with Anypoint Runtime Manager.
NEW QUESTION # 74
An API implementation is being designed that must invoke an Order API, which is known to repeatedly experience downtime.
For this reason, a fallback API is to be called when the Order API is unavailable.
What approach to designing the invocation of the fallback API provides the best resilience?
- A. Set an option in the HTTP Requester component that invokes the Order API to instead invoke a fallback API whenever an HTTP 4xx or 5xx response status code is returned from the Order API
- B. Create a separate entry for the Order API in API Manager, and then invoke this API as a fallback API if the primary Order API is unavailable
- C. Redirect client requests through an HTTP 307 Temporary Redirect status code to the fallback API whenever the Order API is unavailable
- D. Search Anypoint Exchange for a suitable existing fallback API, and then implement invocations to this fallback API in addition to the Order API
Answer: D
Explanation:
Correct Answer : Search Anypoint exchange for a suitable existing fallback API, and then implement invocations to this fallback API in addition to the order API
*****************************************
>> It is not ideal and good approach, until unless there is a pre-approved agreement with the API clients that they will receive a HTTP 3xx temporary redirect status code and they have to implement fallback logic their side to call another API.
>> Creating separate entry of same Order API in API manager would just create an another instance of it on top of same API implementation. So, it does NO GOOD by using clone od same API as a fallback API. Fallback API should be ideally a different API implementation that is not same as primary one.
>> There is NO option currently provided by Anypoint HTTP Connector that allows us to invoke a fallback API when we receive certain HTTP status codes in response.
The only statement TRUE in the given options is to Search Anypoint exchange for a suitable existing fallback API, and then implement invocations to this fallback API in addition to the order API.
NEW QUESTION # 75
An API client calls one method from an existing API implementation. The API implementation is later updated. What change to the API implementation would require the API client's invocation logic to also be updated?
- A. When a new required field is added to the method called by the API client
- B. When a child method is added to the method called by the API client
- C. When a new method is added to the resource used by the API client
- D. When the data type of the response is changed for the method called by the API client
Answer: A
Explanation:
Correct Answer : When a new required field is added to the method called by the API client
*****************************************
>> Generally, the logic on API clients need to be updated when the API contract breaks.
>> When a new method or a child method is added to an API , the API client does not break as it can still continue to use its existing method. So these two options are out.
>> We are left for two more where "datatype of the response if changed" and "a new required field is added".
>> Changing the datatype of the response does break the API contract. However, the question is insisting on the "invocation" logic and not about the response handling logic. The API client can still invoke the API successfully and receive the response but the response will have a different datatype for some field.
>> Adding a new required field will break the API's invocation contract. When adding a new required field, the API contract breaks the RAML or API spec agreement that the API client/API consumer and API provider has between them. So this requires the API client invocation logic to also be updated.
NEW QUESTION # 76
A Platinum customer uses the U.S. control plane and deploys applications to CloudHub in Singapore with a default log configuration.
The compliance officer asks where the logs and monitoring data reside?
- A. Logs and monitoring data are held in the United States
- B. Logs are held in the United States and monitoring data is held in Singapore
- C. Logs and monitoring data are held in Singapore
- D. Logs are held in:Singapore and monitoring data is held in the United States
Answer: A
Explanation:
For applications deployed on CloudHub in a foreign region (e.g., Singapore), MuleSoft handles log and monitoring data in the region where the control plane resides. This data storage policy is standard for CloudHub deployments to maintain centralized log and monitoring data.
Data Location:
For a U.S.-based control plane, all logs and monitoring data are stored in the United States, regardless of the deployment region.
Although the application itself runs in Singapore, data related to application performance and logs is not localized to the deployment region.
of Correct Answer (B):
Since the control plane is based in the United States, all operational data like logs and monitoring will also be stored there, ensuring compliance with MuleSoft's data handling policies.
of Incorrect Options:
Option A and D are incorrect because MuleSoft does not store logs or monitoring data in the application deployment region when the control plane is located in the United States.
Option C suggests mixed storage, which does not align with MuleSoft's data policy structure.
Reference
For details on data residency in CloudHub deployments, refer to MuleSoft's documentation on CloudHub control planes and data handling policies.
NEW QUESTION # 77
An organization makes a strategic decision to move towards an IT operating model that emphasizes consumption of reusable IT assets using modern APIs (as defined by MuleSoft).
What best describes each modern API in relation to this new IT operating model?
- A. Each modern API has its own software development lifecycle, which reduces the need for documentation and automation
- B. Each modern API must be REST and HTTP based
- C. Each modern API must be easy to consume, so should avoid complex authentication mechanisms such as SAML or JWT D
- D. Each modem API must be treated like a product and designed for a particular target audience (for instance, mobile app developers)
Answer: D
Explanation:
Correct Answers:
1. Each modern API must be treated like a product and designed for a particular target audience (for instance mobile app developers)
*****************************************
Bottom of Form
Top of Form
NEW QUESTION # 78
A set of tests must be performed prior to deploying API implementations to a staging environment. Due to data security and access restrictions, untested APIs cannot be granted access to the backend systems, so instead mocked data must be used for these tests. The amount of available mocked data and its contents is sufficient to entirely test the API implementations with no active connections to the backend systems. What type of tests should be used to incorporate this mocked data?
- A. Unit tests (Whitebox)
- B. Functional tests (Blackbox)
- C. Performance tests
- D. Integration tests
Answer: A
Explanation:
Correct Answer : Unit tests (Whitebox)
*****************************************
Reference:
As per general IT testing practice and MuleSoft recommended practice, Integration and Performance tests should be done on full end to end setup for right evaluation. Which means all end systems should be connected while doing the tests. So, these options are OUT and we are left with Unit Tests and Functional Tests.
As per attached reference documentation from MuleSoft:
Unit Tests - are limited to the code that can be realistically exercised without the need to run it inside Mule itself. So good candidates are Small pieces of modular code, Sub Flows, Custom transformers, Custom components, Custom expression evaluators etc.
Functional Tests - are those that most extensively exercise your application configuration. In these tests, you have the freedom and tools for simulating happy and unhappy paths. You also have the possibility to create stubs for target services and make them success or fail to easily simulate happy and unhappy paths respectively.
As the scenario in the question demands for API implementation to be tested before deployment to Staging and also clearly indicates that there is enough/ sufficient amount of mock data to test the various components of API implementations with no active connections to the backend systems, Unit Tests are the one to be used to incorporate this mocked data.
NEW QUESTION # 79
A REST API is being designed to implement a Mule application.
What standard interface definition language can be used to define REST APIs?
- A. AsyncAPI Specification
- B. YAML
- C. Web Service Definition Language(WSDL)
- D. OpenAPI Specification (OAS)
Answer: D
NEW QUESTION # 80
What best explains the use of auto-discovery in API implementations?
- A. It enables Anypoint Analytics to gain insight into the usage of APIs
- B. It enables Anypoint Exchange to discover assets and makes them available for reuse
- C. It enables Anypoint Studio to discover API definitions configured in Anypoint Platform
- D. It makes API Manager aware of API implementations and hence enables it to enforce policies
Answer: D
Explanation:
Correct Answer : It makes API Manager aware of API implementations and hence enables it to enforce policies.
*****************************************
>> API Autodiscovery is a mechanism that manages an API from API Manager by pairing the deployed application to an API created on the platform.
>> API Management includes tracking, enforcing policies if you apply any, and reporting API analytics.
>> Critical to the Autodiscovery process is identifying the API by providing the API name and version.
Reference:
https://docs.mulesoft.com/api-manager/2.x/api-auto-discovery-new-concept
https://docs.mulesoft.com/api-manager/1.x/api-auto-discovery
https://docs.mulesoft.com/api-manager/2.x/api-auto-discovery-new-concept
NEW QUESTION # 81
Which scenario is suited for MUnit tests instead of integration tests?
- A. For read-only interactions to any dependencies (such as other web APIs)
- B. For tests that are implemented using SoapUI
- C. When no mocking is permissible
- D. When testing does not require knowledge of implementation details
Answer: A
Explanation:
MUnit is MuleSoft's testing framework for creating and running automated tests within Anypoint Studio. It is specifically designed for unit testing Mule applications and is best suited when testing doesn't require understanding the inner workings or implementation details of the components being tested.
Ideal Use Cases for MUnit:
MUnit is optimal when testing individual flows, functions, or components in isolation. This type of testing focuses on verifying the behavior of each unit without needing to understand the complete system.
Since unit tests do not require external integrations or dependencies to be live, mocking is commonly used in MUnit to simulate the behavior of external services and APIs.
Why Option B is Correct:
Option B aligns with the concept of unit testing, where the emphasis is on testing functionality rather than system integration. Integration tests, on the other hand, would require implementation knowledge and live endpoints, making them unsuitable for MUnit's scope.
of Incorrect Options:
Option A (read-only interactions) and Option C (no mocking) do not suit MUnit's typical testing environment as MUnit is designed with mocking capabilities to simulate dependencies.
Option D (SoapUI-based tests) suggests an external testing tool, while MUnit is specific to MuleSoft.
Reference
For more on MUnit best practices, refer to MuleSoft's MUnit documentation.
NEW QUESTION # 82
What are the major benefits of MuleSoft proposed IT Operating Model?
- A. 1. Decrease the IT delivery gap
2. Meet various business demands without increasing the IT capacity
3. Make consumption of assets at the rate of production - B. 1. Decrease the IT delivery gap
2. Meet various business demands by increasing the IT capacity and forming various IT departments
3. Make consumption of assets at the rate of production - C. 1. Decrease the IT delivery gap
2. Meet various business demands without increasing the IT capacity
3. Focus on creation of reusable assets first. Upon finishing creation of all the possible assets then inform the LOBs in the organization to start using them
Answer: A
Explanation:
Correct Answer :
1. Decrease the IT delivery gap
2. Meet various business demands without increasing the IT capacity
3. Make consumption of assets at the rate of production.
*****************************************
Reference:
NEW QUESTION # 83
When must an API implementation be deployed to an Anypoint VPC?
- A. When the API Implementation must invoke publicly exposed services that are deployed outside of CloudHub in a customer- managed AWS instance
- B. When the API implementation must be accessible within a subnet of a restricted customer-hosted network that does not allow public access
- C. When the API implementation must be deployed to a production AWS VPC using the Mule Maven plugin
- D. When the API Implementation must write to a persistent Object Store
Answer: A
NEW QUESTION # 84
True or False. We should always make sure that the APIs being designed and developed are self-servable even if it needs more man-day effort and resources.
- A. TRUE
- B. FALSE
Answer: A
Explanation:
Correct Answer : TRUE
*****************************************
>> As per MuleSoft proposed IT Operating Model, designing APIs and making sure that they are discoverable and self-servable is VERY VERY IMPORTANT and decides the success of an API and its application network.
NEW QUESTION # 85
A customer wants to host their MuleSoft applications in CloudHub 1.0, and these applications should be available at the domain https://api.acmecorp.com.
After creating a dedicated load balancer (DLB) called acme-dib-prod, which further action must the customer take to complete the configuration?
- A. Configure the DLB with a TLS certificate for api.acmecorp.com and create a CNAME record from api.acmecorp.com to acme-dib-prod.|lb.anypointdns.net
- B. Configure the DLB with a TLS certificate for acme-dib-prod.Jb.anypointdns.net and create a CNAME record from api.acmecorp:com to acme-dlb-prod.lb.anypointdns.net
- C. Configure the DLB with a TLS certificate for api.acmecorp.com and create an A record for api.acmecorp.com to the public IP addresses associated with their DLB
- D. Configure the DLB with a TLS certificate for aplacmecorp.com and create a CNAME record from api.aomecorp.com to acme-dib-prod.ei.cloubhub.io
Answer: A
Explanation:
When setting up a custom domain for MuleSoft applications hosted on CloudHub 1.0 using a Dedicated Load Balancer (DLB), follow these steps:
Set Up the TLS Certificate: Configure the DLB (acme-dib-prod) with a TLS certificate that covers the custom domain api.acmecorp.com. This certificate will allow HTTPS traffic to be securely directed through the DLB to your Mule applications.
DNS Configuration with CNAME:
Create a CNAME record that points api.acmecorp.com to the DLB hostname acme-dib-prod.lb.anypointdns.net.
The CNAME record enables the custom domain to resolve to the DLB provided by MuleSoft's Anypoint Platform. This CNAME mapping directs all traffic to the correct DLB for processing and load distribution.
Why Option B is Correct:
A CNAME record provides the necessary aliasing to acme-dib-prod.lb.anypointdns.net, which is the endpoint managed by Anypoint Platform for your DLB.
Option B also correctly identifies the need to configure the DLB with a TLS certificate specifically for api.acmecorp.com rather than for the DLB's internal hostname.
of Incorrect Options:
Options that suggest configuring the DLB with a TLS certificate for the DLB's internal hostname or using an A record are not suitable in this scenario. MuleSoft CloudHub 1.0 DLBs work with CNAME records to provide flexible and scalable domain management, and a direct IP (A record) is not supported for these load balancers.
Reference
For more information on configuring custom domains and DLBs on CloudHub 1.0, refer to the MuleSoft documentation on DLB setup and DNS configuration.
NEW QUESTION # 86
What condition requires using a CloudHub Dedicated Load Balancer?
- A. When server-side load-balanced TLS mutual authentication is required between API implementations and API clients
- B. When custom DNS names are required for API implementations deployed to customer-hosted Mule runtimes
- C. When API invocations across multiple CloudHub workers must be load balanced
- D. When cross-region load balancing is required between separate deployments of the same Mule application
Answer: A
Explanation:
Correct Answer : When server-side load-balanced TLS mutual authentication is required between API implementations and API clients
*****************************************
Fact/ Memory Tip: Although there are many benefits of CloudHub Dedicated Load balancer, TWO important things that should come to ones mind for considering it are:
>> Having URL endpoints with Custom DNS names on CloudHub deployed apps
>> Configuring custom certificates for both HTTPS and Two-way (Mutual) authentication.
Coming to the options provided for this question :
>> We
CANNOT use DLB to perform cross-region load balancing between separate deployments of the same Mule application.
>> We can have mapping rules to have more than one DLB URL pointing to same Mule app. But vicevera (More than one Mule app having same DLB URL) is NOT POSSIBLE
>> It is true that DLB helps to setup custom DNS names for Cloudhub deployed Mule apps but NOT true for apps deployed to Customer-hosted Mule Runtimes.
>> It is true to that we can load balance API invocations across multiple CloudHub workers using DLB but it is NOT A MUST. We can achieve the same (load balancing) using SLB (Shared Load Balancer) too. We DO NOT necessarily require DLB for achieve it.
So the only right option that fits the scenario and requires us to use DLB is when TLS mutual authentication is required between API implementations and API clients.
NEW QUESTION # 87
......
Pass Your MuleSoft-Platform-Architect-I Exam Easily With 100% Exam Passing Guarantee: https://braindumps.actual4exams.com/MuleSoft-Platform-Architect-I-real-braindumps.html