D-UN-DY-23 Exam Dumps Free Test Engine Verified By Proven Professional Certified Experts [Q23-Q40]

Share

D-UN-DY-23 Exam Dumps Free Test Engine Verified By Proven Professional Certified Experts

Use Real EMC Achieve the D-UN-DY-23 Dumps - 100% Exam Passing Guarantee


EMC D-UN-DY-23 (Dell Unity Deploy 2023) Exam is a certification exam that validates the skills and knowledge required to deploy and manage Dell Unity storage systems. D-UN-DY-23 exam covers a range of topics including installation, configuration, management, and troubleshooting. Passing D-UN-DY-23 exam demonstrates that an IT professional has the expertise required to deploy and manage Dell Unity storage systems effectively.

 

NEW QUESTION # 23
A Unity customer has a 20 TB pool consisting of SAS and NL-SAS drives.
Based on Dell EMC best practices, what is the minimum recommended amount of Flash capacity they should use for a Flash tier?

  • A. 4 TB
  • B. 10 TB
  • C. 2 TB
  • D. 1 TB

Answer: D


NEW QUESTION # 24
A storage administrator wants to configure a system to join the list of arrays remotely monitoring for activity and system status using Central. The security policy on the Unishpere server is set to "automatic".
What additional security information must be specified in the Unispered Settings window to enable communication with Unisphare Central?

  • A. Unisphere Central IP address and Central Hash
  • B. Unisphere Central IP address and login credentials Hash
  • C. Unisphere Central Hash and login credentials
  • D. Unisphere Central Hash and challenge phrase

Answer: A


NEW QUESTION # 25
What is the default NFS share access permission?

  • A. Read-Only
  • B. No Access
  • C. Read/Write
  • D. Read-only, allow Root

Answer: B


NEW QUESTION # 26
In UnityVSA, what is the maximum storage capacity offered by the WOLs license?

  • A. 50TB
  • B. 4TB
  • C. 25TB
  • D. 10TB

Answer: A


NEW QUESTION # 27
When is it safe to swap a Storage Processor (SP) when performing a Data in Place upgrade?

  • A. SP fault and power lights on both SPs are off
    Amber fault LEDs on both power supplies are lit
  • B. SP fault and power lights on both SPs are blinking at 1Hz
    Amber fault LEDs on both power supplies are lit
  • C. SP fault and power lights on both SPs are off
    Amber fault LEDs on both power supplies are off
  • D. SP fault and power lights on both SPs are solid amber
    Amber fault LEDs on both power supplies are off

Answer: A


NEW QUESTION # 28
Which Unity feature provides a high bandwidth connection for large file transfers, enables proactive Service Request generation and usage license reporting, and operates on a 24x7 basis?

  • A. Software Licensing Central
  • B. Unisphere Central
  • C. EMC Secure Remote Services
  • D. EMC Service Center

Answer: C


NEW QUESTION # 29
A user is having difficulty troubleshooting a Unity storage system and the service provider has been contacted for assistance. The service provider needs to run some service commands on the Storage Processors to troubleshoot the issue further.
Which step must be taken to allow the service provider remote access to the storage system?

  • A. Set the Unisphre preferences to "Optimize" for remote access.
  • B. Enable SSH on the storage system
  • C. Specify the SMTP configuration
  • D. Specify the Remote Logging configuration

Answer: B


NEW QUESTION # 30
What is a characteristic of FAST VP?

  • A. Fast VP optimizes data replacement by moving 1 GB slices between disk tiers.
  • B. Users can set the Fast VP data relocation rate.
  • C. Users can enable or disable FAST VP at the LUN level.
  • D. Fast VP data relocation runs in the background at all times once it is enabled.

Answer: B

Explanation:
Explanation
FAST VP (Fully Automated Storage Tiering for Virtual Pools) is a feature that automatically moves data within a storage pool based on the performance requirements and access patterns of the data. FAST VP data relocation runs in the background according to a user-defined schedule and rate. The schedule determines when the data relocation starts and ends, and the rate determines how much system resources are used for the data relocation. Users can set the Fast VP data relocation rate to High, Medium, Low, or None. High means that the data relocation has the highest priority and uses the most system resources, while None means that the data relocation is disabled. Fast VP data relocation does not run at all times, but only during the scheduled window. Fast VP optimizes data placement by moving 256 MB slices between disk tiers, not 1 GB slices.
Users cannot enable or disable FAST VP at the LUN level, but only at the storage pool level.
References: [Dell EMC Unity: FAST Technology Overview], [Dell EMC Unity: Storage Pools and RAID Groups]


NEW QUESTION # 31
Which is the preferred FC Port for synchronous replication for a Dell Unity XT 380 system?

  • A. Port 0 of I/O module 1.
  • B. Fibre Channel Port 0 of I/O module 0.
  • C. Fibre Channel Port 4 of SPA and SPB.
  • D. Port 1 of I/O module 0.

Answer: C


NEW QUESTION # 32
What is the maximum size of a drive partnership group when expanding a Dynamic Pool?

  • A. 84 drives
  • B. 32 drives
  • C. 96 drives
  • D. 64 drives

Answer: A


NEW QUESTION # 33
What capability is provided by the Dell EMC CIFS Management snap-in?

  • A. Manage local NAS Server users
  • B. Manage home directories
  • C. Configure share permissions
  • D. Configure NAS Server registry settings

Answer: C


NEW QUESTION # 34
A storage administrator has added multiple resources to a single density-based Host I/O Limit policy for the following storage resources:
- LUN A: 25 GB
- LUN B: 25 GB
- LUN C: 50 GB
- Density-Based Limit 20 IOPS
What is the total IOPS set by this policy?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: D


NEW QUESTION # 35
What is the correct sequence of steps taken by the storage array when an AC power failure is detected?

Answer:

Explanation:


NEW QUESTION # 36
Writes are redirected on the parent pool.
A company needs to expand their dynamic pool by 5 TB. The current dynamic pool consists of 63 3.8 TB SSDs that are configured for RAID 5 (4+1).
What is the minimum number of drives needed for the pool expansion?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: D


NEW QUESTION # 37
A system administrator wants to configure asynchronous remote replication on their Unity systems.
What is required for the Asynchronous replication architecture?

  • A. IP-based replication interfaces configured on both source and destination for managing replication Replication Connection between the two replication systems for replicating data
  • B. FC-based replication interfaces configured on both source and destination for managing replication Replication Connection between the two replication systems for replicating data
  • C. FC-based replication interfaces configured on both source and destination for replicating data Replication Connection between the two replication systems for managing replication
  • D. IP-based replication interfaces configured on both source and destination for replicating data Replication Connection between the two replication systems for managing replication

Answer: D


NEW QUESTION # 38
What are two prerequisites when creating host configuration for NFS client? (Choose two.)

  • A. Tenant information
  • B. Subnet access
  • C. Hostname
  • D. Network Address

Answer: C,D

Explanation:
Explanation
Host configuration is the process of defining the host properties and access permissions for a host that connects to the Dell Unity XT system. For NFS clients, the host configuration requires two prerequisites:
Network Address: The network address is the IP address or the subnet mask of the NFS client that identifies the host on the network. The network address is used to register the host on the Dell Unity XT system and to grant access to the NFS filesystems.
Hostname: The hostname is the name of the NFS client that is resolved by the DNS server or the local hosts file. The hostname is used to display the host information on the Unisphere UI and to enable host monitoring and alerting.
References:
Dell EMC Unity: Host Configuration
Dell EMC Unity: File System Configuration and Management


NEW QUESTION # 39
Which storage objects support Advanced Deduplication?

  • A. vols and Thick LUNs
  • B. Thin LUNs and thin VMFS datastores
  • C. Thin LUNs and thick LUNs
  • D. VMFS datastores and Vols

Answer: B


NEW QUESTION # 40
......

Check the Free demo of our D-UN-DY-23 Exam Dumps with 469 Questions: https://braindumps.actual4exams.com/D-UN-DY-23-real-braindumps.html