[2025] New FCP_FCT_AD-7.2 exam dumps Use Updated Fortinet Exam
Verified FCP_FCT_AD-7.2 Dumps Q&As - FCP_FCT_AD-7.2 Test Engine with Correct Answers
Fortinet FCP_FCT_AD-7.2 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 29
Which two are benefits of using multi-tenancy mode on FortiClient EMS? (Choose two.)
- A. Separate host servers manage each site.
- B. It provides granular access and segmentation.
- C. The fabric connector must use an IP address to connect to FortiClient EMS.
- D. Licenses are shared among sites
Answer: B,D
Explanation:
Understanding Multi-Tenancy Mode:
Multi-tenancy mode allows multiple independent sites or tenants to be managed from a single FortiClient EMS instance.
Evaluating Benefits:
Licenses can be shared among sites, making it cost-effective (B).
It provides granular access and segmentation, allowing for detailed control and separation between tenants (D).
Eliminating Incorrect Options:
Separate host servers managing each site (A) is not a feature of multi-tenancy mode.
The fabric connector's use of an IP address (C) is unrelated to multi-tenancy benefits.
Reference:
FortiClient EMS multi-tenancy configuration and benefits documentation from the study guides.
NEW QUESTION # 30
A FortiClient EMS administrator has enabled the compliance rule forthe sales department Which Fortinet device will enforce compliance with dynamic access control?
- A. FortiClient EMS
- B. FortiGate
- C. FortiClient
- D. FortiAnalyzer
Answer: B
Explanation:
* Understanding Compliance Rules:
* The compliance rule for the sales department needs to be enforced dynamically.
* Enforcing Compliance:
* FortiGate is responsible for enforcing compliance by integrating with FortiClient EMS to apply dynamic access control based on compliance status.
* Conclusion:
* The Fortinet device that will enforce compliance with dynamic access control is the FortiGate.
References:
* Compliance and enforcement documentation from FortiGate and FortiClient EMS study guides.
NEW QUESTION # 31
Refer to the exhibit, which shows FortiClient EMS deployment, profiles.
When an administrator creates a deployment profile on FortiClient EMS. which statement about the deployment profile is true?
- A. Deployment-2 will upgrade FortiClient on both the AD group and workgroup.
- B. Deployment-1 will upgrade FortiClient only on the workgroup.
- C. Deployment-2 will install FortiClient on both the AD group and workgroup.
- D. Deployment-1 will install FortiClient on new AO group endpoints.
Answer: A
Explanation:
* Deployment Profiles Analysis:
* Deployment-1 has the "First-Time-Installation" package and is assigned to "All Groups" with a priority of 1 but is not enabled.
* Deployment-2 has the "To-Upgrade" package, is assigned to both "All Groups" and
"trainingAD.training.lab," with a priority of 2 and is enabled.
* Evaluating Deployment-2:
* Deployment-2 will upgrade FortiClient on both "All Groups" and "trainingAD.training.lab" since it is enabled and assigned to these groups. This includes both AD (Active Directory) groups and workgroups.
* Conclusion:
* Since Deployment-2 is set to upgrade FortiClient on all the assigned groups and workgroups, the correct answer is A.
References:
* FortiClient EMS deployment and profile documentation from the study guides.
NEW QUESTION # 32
An administrator wants to simplify remote accesswithout asking users to provideuser credentials Which access control method provides this solution?
- A. L2TP
- B. ZTNA IP/MAC littering mode
- C. ZTNA full mode
- D. SSL VPN
Answer: C
Explanation:
* Simplifying Remote Access:
* The administrator wants to simplify remote access without asking users to provide user credentials.
* Evaluating Access Control Methods:
* ZTNA full mode can provide seamless access by leveraging device identity and posture, eliminating the need for user credentials for each access request.
* Other methods like SSL VPN and L2TP typically require user credentials.
* Conclusion:
* The correct access control method that provides this solution is ZTNA full mode.
References:
* ZTNA section in the FortiGate Infrastructure 7.2 Study Guide.
NEW QUESTION # 33
What is the function of the quick scan option on FortiClient?
- A. It allows users to select a specific file folder on their local hard disk drive (HDD), to scan for threats.
- B. It performs a full system scan including all files, executable files. DLLs, and drivers for throats.
- C. It scans executable files. DLLs, and drivers that are currently running, for threats.
- D. It scans programs and drivers that are currently running, for threats
Answer: C
Explanation:
* Understanding Quick Scan Function:
* The quick scan option on FortiClient is designed to scan certain elements of the system quickly for threats.
* Evaluating Scan Scope:
* The quick scan specifically targets executable files, DLLs, and drivers that are currently running, providing a rapid assessment of the active components of the system.
* Conclusion:
* The correct answer is D, as it accurately describes the function of the quick scan option on FortiClient.
References:
* FortiClient scanning options documentation from the study guides.
NEW QUESTION # 34
Refer to the exhibit.
Based on the settings shown in the exhibit what action will FortiClient take when it detects that a user is trying to download an infected file?
- A. Sends the infected file to FortiGuard for analysis
- B. Blocks the infected files as it is downloading
- C. Quarantines the infected files and logs all access attempts
- D. Allows the infected file to download without scan
Answer: D
Explanation:
Block Malicious Website has nothing to do with infected files. Since Realtime Protection is OFF, it will be allowed without being scanned.
Based on the settings shown in the exhibit:
* Realtime Protection:OFF
* Dynamic Threat Detection:OFF
* Block malicious websites:ON
* Threats Detected:75
The "Realtime Protection" setting is crucial for preventing infected files from being downloaded and executed.
Since "Realtime Protection" is OFF, FortiClient will not actively scan files being downloaded. The setting
"Block malicious websites" is intended to prevent access to known malicious websites but does not scan files for infections.
Therefore, when a user tries to download an infected file, FortiClient will allow the file to download without scanning it due to the Realtime Protection being OFF.
References
* FortiClient EMS 7.2 Study Guide, Antivirus Protection Section
* Fortinet Documentation on FortiClient Real-time Protection Settings
NEW QUESTION # 35
Which security fabric component sends a notification io quarantine an endpoint after IOC detection "n the automation process?
- A. FortiClient EMS
- B. FortiGate
- C. FortiClient
- D. FortiAnalyzer
Answer: A
Explanation:
* Understanding the Automation Process:
* In the Security Fabric, automation processes can include actions such as quarantining an endpoint
* after an IOC (Indicator of Compromise) detection.
* Evaluating Responsibilities:
* FortiClient EMS plays a crucial role in endpoint management and can send notifications to quarantine endpoints.
* Conclusion:
* The correct security fabric component that sends a notification to quarantine an endpoint after IOC detection is FortiClient EMS.
References:
* FortiClient EMS and automation process documentation from the study guides.
NEW QUESTION # 36
Refer to the exhibit.
Based on the settings shown in the exhibit what action will FortiClient take when it detects that a user is trying to download an infected file?
- A. Sends the infected file to FortiGuard for analysis
- B. Blocks the infected files as it is downloading
- C. Quarantines the infected files and logs all access attempts
- D. Allows the infected file to download without scan
Answer: D
Explanation:
Block Malicious Website has nothing to do with infected files. Since Realtime Protection is OFF, it will be allowed without being scanned.
Based on the settings shown in the exhibit:
* Realtime Protection:OFF
* Dynamic Threat Detection:OFF
* Block malicious websites:ON
* Threats Detected:75
The "Realtime Protection" setting is crucial for preventing infected files from being downloaded and executed. Since "Realtime Protection" is OFF, FortiClient will not actively scan files being downloaded. The setting "Block malicious websites" is intended to prevent access to known malicious websites but does not scan files for infections.
Therefore, when a user tries to download an infected file, FortiClient will allow the file to download without scanning it due to the Realtime Protection being OFF.
References
* FortiClient EMS 7.2 Study Guide, Antivirus Protection Section
* Fortinet Documentation on FortiClient Real-time Protection Settings
NEW QUESTION # 37
Refer to the exhibit, which shows the Zero Trust Tagging Rule Set configuration.
Which two statements about the rule set are true? (Choose two.)
- A. The endpoint must satisfy that only Windows 10 is running.
- B. The endpoint must satisfy that only AV software is installed and running.
- C. The endpoint must satisfy that antivirus is installed and running and Windows 10 is running.
- D. The endpoint must satisfy that only Windows Server 2012 R2 is running.
Answer: C,D
Explanation:
Based on the Zero Trust Tagging Rule Set configuration shown in the exhibit:
* The rule set includes two conditions:
* AV Software is installed and running
* OS Version is Windows Server 2012 R2 or Windows 10
* The Rule Logic is specified as "(1 and 3) or 2," meaning:
* The endpoint must have antivirus software installed and running and must be running Windows
10.
* Alternatively, the endpoint must be running Windows Server 2012 R2.
Therefore, the endpoint must satisfy either:
* Antivirus is installed and running and Windows 10 is running.
* Windows Server 2012 R2 is running.
References
* FortiClient EMS 7.2 Study Guide, Zero Trust Tagging Rule Set Configuration Section
* Fortinet Documentation on Configuring Zero Trust Tagging Rules and Logic
NEW QUESTION # 38
ZTNA Network Topology
Refer to the exhibits, which show a network topology diagram of ZTNA proxy access and the ZTNA rule configuration.
An administrator runs the diagnose endpoint record list CLI command on FortiGate to check Remote-Client endpoint information, however Remote-Client is not showing up in the endpoint record list.
What is the cause of this issue?
- A. Remote-Client provided an invalid certificate to connect to the ZTNA access proxy.
- B. Remote-Client failed the client certificate authentication.
- C. Remote-Client has not initiated a connection to the ZTNA access proxy.
- D. Remote-Client provided an empty client certificate to connect to the ZTNA access proxy.
Answer: B
NEW QUESTION # 39
Which two third-party tools can an administrator use to deploy FortiClient? (Choose two.)
- A. QR code generator
- B. Microsoft Active Directory GPO
- C. Microsoft SCCM
- D. Microsoft Windows Installer
Answer: B,C
Explanation:
Administrators can use several third-party tools to deploy FortiClient:
Microsoft SCCM (System Center Configuration Manager): SCCM is a robust tool used for deploying software across large numbers of Windows-based systems. It supports deployment of FortiClient through its software distribution capabilities.
Microsoft Active Directory GPO (Group Policy Object): GPOs are used to manage user and computer settings in an Active Directory environment. Administrators can deploy FortiClient to multiple machines using GPO software installation settings.
These tools provide centralized and scalable methods for deploying FortiClient across numerous endpoints in an enterprise environment.
Reference
FortiClient EMS 7.2 Study Guide, FortiClient Deployment Section
Fortinet Documentation on FortiClient Deployment using SCCM and GPO
NEW QUESTION # 40
Which three types of antivirus scans are available on FortiClient? (Choose three )
- A. Custom scan
- B. Proxy scan
- C. Flow scan
- D. Quick scan
- E. Full scan
Answer: A,D,E
Explanation:
FortiClient offers several types of antivirus scans to ensure comprehensive protection:
* Full scan:Scans the entire system for malware, including all files and directories.
* Custom scan:Allows the user to specify particular files, directories, or drives to be scanned.
* Quick scan:Scans the most commonly infected areas of the system, providing a faster scanning option.
These three types of scans provide flexibility and thoroughness in detecting and managing malware threats.
References
* FortiClient EMS 7.2 Study Guide, Antivirus Scanning Options Section
* Fortinet Documentation on Types of Antivirus Scans in FortiClient
NEW QUESTION # 41
An administrator configures ZTNA configuration on theFortiGate. Which statement is true about the firewall policy?
- A. It defines ZTNA server.
- B. It uses the access proxy.
- C. It only uses ZTNA tags to control access for endpoints.
- D. It redirects the client request to the access proxy.
Answer: D
Explanation:
"The firewall policy matches and redirects client requests to the access proxy VIP"https://docs.fortinet.com/document/fortigate/7.0.0/new-features/194961/basic-ztna-configuration
NEW QUESTION # 42
Refer to the exhibit.
Based on the settings shown in the exhibit which statement about FortiClient behavior is true?
- A. FortiClient copies infected files to the Resources folder without scanning them.
- B. FortiClient blocks and deletes infected files after scanning them.
- C. FortiClient scans infected files when the user copies files to the Resources folder
- D. FortiClient quarantines infected files and reviews later, after scanning them.
Answer: D
Explanation:
Action On Virus Discovery Warn the User If a Process Attempts to Access Infected Files Quarantine Infected Files. You can use FortiClient to view, restore, or delete the quarantined file, as well as view the virus name, submit the file to FortiGuard, and view logs. Deny Access to Infected Files Ignore Infected Files
NEW QUESTION # 43
FortiClient EMS endpoint policies
Refer to the exhibit, which shows multiple endpoint policies on FortiClient EMS. Which policy is applied to the endpoint in the AD group trainingAD
- A. The Default policy because it has the highest priority
- B. Both the Sales and Training policies because their priority is higher than the Default policy
- C. The sales policy
- D. The Training policy
Answer: D
Explanation:
* Observation of Endpoint Policies:
* The exhibit shows multiple endpoint policies with their assigned groups, priority levels, and enabled status.
* Evaluating Policy Assignment:
* The Training policy is specifically assigned to the "trainingAD.training.lab" group, with a higher priority than the Default policy.
* Conclusion:
* The correct policy applied to the endpoint in the AD group "trainingAD" is the Training policy (A).
References:
* FortiClient EMS policy configuration and priority management documentation from the study guides.
NEW QUESTION # 44
Refer to the exhibit, which shows the endpoint summary information on FortiClient EMS.
What two conclusions can you make based on the Remote-Client status shown above? (Choose two.)
- A. The endpoint is configured to support FortiSandbox.
- B. The endpoint has been assigned the Default endpoint policy.
- C. The endpoint is classified as at risk.
- D. The endpoint is currently off-net.
Answer: B,D
Explanation:
Based on the Remote-Client status shown in the exhibit:
* Endpoint Policy:The "Policy" field shows "Default," indicating that the endpoint has been assigned the Default endpoint policy.
* Connection Status:The "Location" field shows "Off-Fabric," meaning that the endpoint is currently off the corporate network (off-net).
Therefore, the two conclusions that can be made are:
* The endpoint has been assigned the Default endpoint policy.
* The endpoint is currently off-net.
References
* FortiClient EMS 7.2 Study Guide, Endpoint Summary Information Section
* Fortinet Documentation on Endpoint Policies and Status Indicators
NEW QUESTION # 45
What is the function of the quick scan option on FortiClient?
- A. It scans executable files. DLLs, and drivers that are currently running, for threats.
- B. It allows users to select a specific file folder on their local hard disk drive (HDD), to scan for threats.
- C. It performs a full system scan including all files, executable files. DLLs, and drivers for throats.
- D. It scans programs and drivers that are currently running, for threats
Answer: C
Explanation:
* Understanding Quick Scan Function:
* The quick scan option on FortiClient is designed to scan certain elements of the system quickly for threats.
* Evaluating Scan Scope:
* The quick scan specifically targets executable files, DLLs, and drivers that are currently running, providing a rapid assessment of the active components of the system.
* Conclusion:
* The correct answer is D, as it accurately describes the function of the quick scan option on FortiClient.
References:
* FortiClient scanning options documentation from the study guides.
NEW QUESTION # 46
Which statement about FortiClient enterprise management server is true?
- A. lt provides centralized management of multiple endpoints running FortiClient software.
- B. It provides centralized management of FortiGate devices.
- C. It provides centralized management of Chromebooks running real-time protection
- D. It provides centralized management of FortiClient Android endpoints only.
Answer: A
Explanation:
FortiClient EMS is designed to provide centralized management and control of multiple endpoints running FortiClient software. It serves as a central management server that allows administrators to efficiently manage and configure a large number of FortiClient installations across the network.
NEW QUESTION # 47
......
Pass Your FCP_FCT_AD-7.2 Dumps as PDF Updated on 2025 With 57 Questions: https://braindumps.actual4exams.com/FCP_FCT_AD-7.2-real-braindumps.html