[2023] DES-3128 Dumps are Available for Instant Access
Valid DES-3128 Dumps for Helping Passing DES-3128 Exam!
The DES-3128 certification exam focuses on the implementation of EMC NetWorker backup and recovery solutions. DES-3128 exam covers a range of topics, including NetWorker architecture, installation and configuration, backup and recovery concepts and techniques, data deduplication and compression, disaster recovery, monitoring and troubleshooting, and performance optimization. DES-3128 exam also covers advanced topics, such as NetWorker integration with other EMC products, such as Avamar and Data Domain.
NEW QUESTION # 20
Which monitoring tool is used to view current device operations, active sessions, messages concerning recent activity, and any pending messages?
- A. NetWorker Character-Based Interface
- B. nsradmin
- C. nsrwatch
- D. Networker WebUser Interface
Answer: D
NEW QUESTION # 21
A NetWorker server is utilizing a remote storage node. There is a PowerProtect DD appliance with two VTLs configured, and it is attached to the storage node via Fiber Channel. There is also a physical media library attached to the same storage node.
How many nsrlcpd processes are running on the storage node?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
When a NetWorker server is utilizing a remote storage node, two nsrlcpd processes will be running on the storage node. The first one is responsible for communication between the NetWorker server and the storage node, while the second one is used to communicate with the PowerProtect DD appliance and the physical media library.
NEW QUESTION # 22
What is the outcome of using the recover -iN command?
- A. The file is not recovered if a conflict occurs.
- B. The recovered file is renamed when a conflict occurs.
- C. The file overwrites the existing file if it is newer than the existing file.
- D. A recover is simulated, and no data is recovered.
Answer: B
NEW QUESTION # 23
A customer has configured 3 new Linux server named Server01 as a backup client. They cannot see any files backed up when a restore operation is attempted Use the simulator to resolve the issue.
When you have finished, continue to the next Question
Answer:
Explanation:
Send the feedback for this answer.
NEW QUESTION # 24
An administrator already added a client "CLientA" This client has recently been assigned a second DNS named "ClientAB" When the backup ran, the following error is observed
"The client ClientAB is not in backup servers' clients list."
Use the simulator to resolve this issue
When you have finished, continue to the next question
Answer:
Explanation:
The steps to resolve the issue of the client "ClientAB" not being in the backup server's clients list are as follows:
Verify the client name:
On the NetWorker server, open the NetWorker Management Console.
Go to the Clients tab.
Verify that the client "ClientA" is present in the list of clients.
Verify that the client "ClientAB" is not present in the list of clients.
Update the client name:
On the NetWorker server, open the NetWorker Management Console.
Go to the Clients tab.
Click on the ClientA.
In the Client Name field, update the name to "ClientAB"
In the Client Address field, enter the IP address or hostname of the client.
Click on the OK button to save the changes.
Re-schedule the backup
Go to the Clients tab.
Click on the ClientAB.
Go to the Schedules tab.
Remove the current schedule and create a new schedule for the client.
Select the appropriate schedule for the backup.
In the Save Set field, select the save set that you need to backup.
Click on the OK button to schedule the backup.
Monitor the backup process
Monitor the backup process to ensure that it is running successfully.
Check the logs for any errors.
NEW QUESTION # 25
A backup administrator has installed a NetWorker Server on a Windows 2019 host. The installation finished successfully. When the NMC Launcher started and the backup server's name is specified as the NMC server, the following error is observed.
Unable to connect the NMC server
The administrator determined the NMC was not installed. What is the recommended action to resolve the issue?
- A. Open a service request with Dell Technologies.
- B. Run the lgtoxtdcint-fversionJ.exe installation executable.
- C. Run the lgtonmc-[version].exe installation executables.
- D. Rerun the installation and enable the NMC option.
Answer: D
Explanation:
The NMC (NetWorker Management Console) is a web-based graphical user interface that enables administrators to manage NetWorker and its components. If the NMC is not installed, the error message "Unable to connect the NMC server" will be displayed. The recommended action to resolve the issue is to rerun the installation and enable the NMC option.
NEW QUESTION # 26
What is staging used for?
- A. move data to a different storage device
- B. make and keep a second copy at all times
- C. keep both copies online at all times
- D. maintain a longer retention period
Answer: A
NEW QUESTION # 27
A backup administrator was asked to configure a Microsoft Exchange server To which two types of devices can this backup be directed?
- A. Tape and PowerProtect DD
- B. Dell EMC Cloud Tier and Tape
- C. PowerProtect DD and AFTD
- D. CloudBoost and PowerProtect DD
Answer: C
Explanation:
A backup administrator can configure a Microsoft Exchange server to be directed to two types of devices: PowerProtect DD and AFTD (Advanced File Type Discovery). PowerProtect DD is a disk-based data protection solution from Dell EMC that provides backup, replication, and recovery for physical, virtual, and cloud environments. AFTD is an add-on that helps to identify, classify, and protect file types such as Microsoft Exchange and other applications in physical, virtual, and cloud environments.
NEW QUESTION # 28
A customer recently added a Hyper-V 2016 servers' farm, and the hosted Virtual Machines need to be backed up. The administrator has already installed a NetWorker client on all Hyper-V hosts.
Which additional component must be installed on the Hyper-V hosts to accomplish this task?
- A. Storage Node
- B. vProxy
- C. NMDA
- D. NMM
Answer: C
Explanation:
NMDA, or NetWorker Module for Databases and Applications, must be installed on the Hyper-V hosts in order to back up the hosted Virtual Machines. NMDA is a specialized NetWorker client that provides support for databases and applications such as Microsoft Exchange, Hyper-V, and Oracle.
NEW QUESTION # 29
A NetWorker workflow is configured as a probe-based backup
What actions must be included in the workflow?
- A. clone and probe and action only
- B. internal and metadata validation
- C. check connectivity and probe actions
- D. probe and backup actions
Answer: C
NEW QUESTION # 30
A NetWorker server has a media library attached. A customer needs to back up their VMware environment using vProxy A designated pool was created for the VMware backups However, this pool is not listed in the drop-down menu during a backup action creation.
What is the cause of this behavior?
- A. The media library is disabled.
- B. A vProxy is disabled
- C. vProxy backups can only be directed to CloudBoost devices.
- D. vProxy backups can only be directed to Data Domain devices.
Answer: C
NEW QUESTION # 31
Which privilege must be assigned to a user group to allow its members lo create NetWorker clients?
- A. Configure NetWorker
- B. Monitor NetWorker
- C. Operate NetWorker
- D. Remote Access All Clients
Answer: A
Explanation:
To allow members of a user group to create NetWorker clients, the Configure NetWorker privilege must be assigned to the user group.
Reference:
The privilege that must be assigned to a user group to allow its members to create NetWorker clients is the "Configure NetWorker" privilege. This privilege allows a user to add, modify and delete clients, groups, and storage nodes, which is necessary for creating new NetWorker clients. The other privileges Monitor, Operate, and Remote Access All Clients, have different scopes, like monitoring the NetWorker system, operating the NetWorker system, or Remote access to all clients, respectively.
You can find more information about the privileges and their scopes in the official EMC documentation: EMC NetWorker Security Guide (https://www.emc.com/collateral/software/technical-documentation/h16703-networker-security-guide.pdf)
NEW QUESTION # 32
A NetWorker server is utilizing a remote storage node. A media library with two LTO Ultnum-8 drives is attached to the storage node via Fiber Channel interface. There is an AFTD device labeled to the Dally pool, and a media library has several cartridges labeled for the Weekly pool.
All devices are configured on the storage node. A Windows 2019 client is being backed up to the Daily pool while the Client Direct option is enabled in the client's properties.
What is the correct data flow?
- A. The storage node writes the data to the LTO Ultrium-8 device.
- B. The storage node writes the data to the AFTD device.
- C. Backup data is being written directly to the AFTD device.
- D. Backup data is being written directly to the LTO Ultrium-8 device.
Answer: A
Explanation:
In this scenario, the NetWorker server is utilizing a remote storage node with a media library containing two LTO Ultnum-8 drives. The AFTD device is labeled to the Dally pool and the media library has several cartridges labeled for the Weekly pool. When the Client Direct option is enabled in the client's properties, the storage node writes the backup data to the LTO Ultrium-8 device.
NEW QUESTION # 33
A NetWorker server has a PowerProtect DDVE attached It is running out of space, and a customer needs to offload some data to AWS S3 What is the recommended way to perform this?
- A. Deploy a NetWorker storage node in AWS.
- B. Utilize a Dell EMC Cloud Tier feature.
- C. Manually copy data to AWS S3
- D. Deploy a NetWorker storage node in AWS.
Answer: B
Explanation:
The Dell EMC Cloud Tier feature allows customers to offload data from a PowerProtect DDVE to a cloud storage provider such as AWS S3. This feature provides a cost-effective way to store data in the cloud and helps to reduce storage costs associated with on-premises storage.
NEW QUESTION # 34
An administrator added several new LDAP user accounts for backup configuration and monitoring tasks . The LDAP users have been authenticated in NMC.
Where must the user accounts be added so these tasks can be performed on the server?
- A. Users field of the Security Administrators group on the NetWorker server
- B. Privileges field of the user groups on the NetWorker server
- C. External roles field of the user groups on the NetWorker server
- D. Users user group on the NMC server
Answer: C
NEW QUESTION # 35
Which command can be used to query the NetWorker media database and to export the fields as comma separated fields?
- A. mminfo -csv
- B. mminfo -m
- C. mminfo -avot
- D. mminfo -xc,
Answer: C
Explanation:
The mminfo command can be used to query the NetWorker media database and to export the fields as comma separated fields. The -avot flag will list all volumes and export the fields as a comma separated list.
NEW QUESTION # 36
......
EMC DES-3128 is a specialized certification exam designed for implementation engineers who are interested in validating their technical knowledge and skills in NetWorker. NetWorker is a data protection solution that provides comprehensive backup and recovery capabilities for small, medium, and large-sized businesses. The DES-3128 certification exam is one of the most sought-after certifications in the IT industry and is recognized globally as proof of expertise in NetWorker.
Updated DES-3128 Dumps Questions For EMC Exam: https://braindumps.actual4exams.com/DES-3128-real-braindumps.html